adnene's profile - activity

Hi if possible can you show us how it can be used the auxiliary signal model to be able to perform this frequency control model. best regardes

Hi if possible can you show us how it can be used the auxiliary signal model to be able to perform this frequency control model. best regardes

Dear colleague, we want to simulate the participation of a VSC_HVDC interconnection in system services, essentially primary and secondary regulation by PSS/E. we would like you to help us model the frequency setting on the HVDC link

I like to do frequency control simulation with VSC HVDC interconnection "VSCDCT". I want a dynamic model in PSS/e which allows to control the power flow on the HVDC link according to frequency variation. thank you

Hello everybody I want to model a VSC-HVDC link WITH pss / e version 33.4. I used the standard template from pss / e. but each time the dynamic parameters of the VSC-HVDC link are introduced, the model is erased and all the parameters disappear ?! is there anyone who has encountered this problem and can help me find the solution. thank you

Hello everybody I want to model a VSC-HVDC link WITH pss / e version 33.4. I used the standard model from pss / e. but each time the dynamic parameters of the VSC-HVDC link are introduced, the model is erased and all the parameters disappear ?! Are there anyone who has encountered this problem and can help me find the solution. thank you

thank you very much. Is there a didactic example to better understand the reliability study with PSS / E ?

thank you very much. Is there a didactic example to better understand the reliability study with PSS / E ?

Hello, According to your experience, which is the best version of PSS / E V33 or V34 ? thanks

hello, how I can do reliability study with PSS/E(V33.2)? I need a help to perform the reliability study. thanks.

hello I thanks that your simulation model is wrong (verify if you have the sequence data).

Thank you very much for your answer. For line to ground fault dynamic simulation it'is clear. However, is there a method for dynamic simulation of a line-to-line fault?

Hello, How to simulate a dynamic short circuit, line-to ground, line to line and line to line to ground ?

thanks

hello, please i want an example of modeling a VSC-HVDC link and CSC_ HVDC link with PSS/E V33.4; and the dynamic modeling for each one. thanks a lot

hello , - Firstly check the convergence of power flow simulation !! ... and check the results of power flow if correct or not ?:(voltage , generation active power, load (p,q)...), the swing bus also ... - if it's ok ! then check the branch data record and the tow winding transformer data record and activate the radio : metred on form end and the winding 1 on form end.

I am having this "insufficient access rights. Insufficient access rights. FDNS9198 (FDNSCLOS/CLSPTI) and Insufficient access rights. YMAT9199 (YMATCLOS/CLSPTI) error, every time I try to solve the system by Newton Raphson method in PSSE. How can i solve this problem?

thanks