bikiran1991's profile - overview

● Famous Question   × 25

• A way to read PSSE sld information into python
• Sample parameters for CIROS1 model
• Automate short circuit current calculations in PSSE
• If there are islands, can I get a list of the islanded buses using psspy?
• Is there a psspy command which can tell whether a user model library has been loaded already?
• How to filter out dummy buses which belong to multi-section lines?
• Is there a way to save the network data (bus voltages, load demand, gen output) at the end of a dynamic simulation?
• Initializing CMLDBLU1
• How to monitor induction machine speed deviation?
• What is the base value for the generator GREF?
• Does PSS/E provide any functionality to auto-correct device limit violations during dynamic simulation initialization?
• Looking for WECC cases (.raw and .dyr)
• How to add models VTGTPAT and FRQTPAT using psspy?
• dyntools.CHNF() causes python to crash. Help!
• How to change induction machine power consumption during dynamic simulations?
• Simulating Fault Induced Delayed Voltage Recovery
• What is the base value used for the PMAX and PMIN values in REECB1 and REPCA1
• Possible to change load MW value during dynamic simulation
• How to simulate reduced system inertia while integrating renewables?
• Are the generator (power flow) limits also enforced in dynamic simulations?
• Are there any models in PSSE which can model nuclear generators?
• Error with importing pssexplore34 (related to _set_psse_loc)
• How does psse determine the current injection for a constant power load during dynamic simulations during low voltages?
• Problems running large number of simulations using same raw and dyr file
• Arrary allocation failed in DYRE

● Commentator   × 1

• Simulating Fault Induced Delayed Voltage Recovery

● Supporter   × 1

• How to change induction machine power consumption during dynamic simulations?

● Enthusiast   × 1

● Scholar   × 1

• Arrary allocation failed in DYRE

● Editor   × 1

• Arrary allocation failed in DYRE

● Student   × 1

• What is the base value for the generator GREF?

● Popular Question   × 26

• A way to read PSSE sld information into python
• Automate short circuit current calculations in PSSE
• Is there a way to get the number of CON entries for a given model?
• If there are islands, can I get a list of the islanded buses using psspy?
• Sample parameters for CIROS1 model
• Is there a way to save the network data (bus voltages, load demand, gen output) at the end of a dynamic simulation?
• Is there a psspy command which can tell whether a user model library has been loaded already?
• How to filter out dummy buses which belong to multi-section lines?
• What is the base value for the generator GREF?
• Does PSS/E provide any functionality to auto-correct device limit violations during dynamic simulation initialization?
• dyntools.CHNF() causes python to crash. Help!
• How to monitor induction machine speed deviation?
• How to add models VTGTPAT and FRQTPAT using psspy?
• Initializing CMLDBLU1
• Simulating Fault Induced Delayed Voltage Recovery
• How to change induction machine power consumption during dynamic simulations?
• Looking for WECC cases (.raw and .dyr)
• Are there any models in PSSE which can model nuclear generators?
• How to simulate reduced system inertia while integrating renewables?
• What is the base value used for the PMAX and PMIN values in REECB1 and REPCA1
• Are the generator (power flow) limits also enforced in dynamic simulations?
• Error with importing pssexplore34 (related to _set_psse_loc)
• How does psse determine the current injection for a constant power load during dynamic simulations during low voltages?
• Possible to change load MW value during dynamic simulation
• Problems running large number of simulations using same raw and dyr file
• Arrary allocation failed in DYRE

● Notable Question   × 26

• A way to read PSSE sld information into python
• Sample parameters for CIROS1 model
• Automate short circuit current calculations in PSSE
• Is there a way to get the number of CON entries for a given model?
• If there are islands, can I get a list of the islanded buses using psspy?
• Is there a psspy command which can tell whether a user model library has been loaded already?
• Is there a way to save the network data (bus voltages, load demand, gen output) at the end of a dynamic simulation?
• How to filter out dummy buses which belong to multi-section lines?
• What is the base value for the generator GREF?
• Does PSS/E provide any functionality to auto-correct device limit violations during dynamic simulation initialization?
• Initializing CMLDBLU1
• dyntools.CHNF() causes python to crash. Help!
• How to monitor induction machine speed deviation?
• How to add models VTGTPAT and FRQTPAT using psspy?
• Simulating Fault Induced Delayed Voltage Recovery
• How to change induction machine power consumption during dynamic simulations?
• Looking for WECC cases (.raw and .dyr)
• Are there any models in PSSE which can model nuclear generators?
• How to simulate reduced system inertia while integrating renewables?
• What is the base value used for the PMAX and PMIN values in REECB1 and REPCA1
• Are the generator (power flow) limits also enforced in dynamic simulations?
• Error with importing pssexplore34 (related to _set_psse_loc)
• How does psse determine the current injection for a constant power load during dynamic simulations during low voltages?
• Possible to change load MW value during dynamic simulation
• Problems running large number of simulations using same raw and dyr file
• Arrary allocation failed in DYRE

● Taxonomist   × 1