Having issues with initializing case in 33.4 version.

asked 2022-11-12 09:52:42 -0500

CynicalSuka
11 ●6 ●7 ●9

My case built and initialized with no errors on work PC having version 33.9 shows multiple initialization errors on another PC having 33.4 version. Same case perfectly initializes on version 33.9. Some things that i dug up while trying to solve the issue. e.g if Vmax of some governor is correctly tuned in 33.9 version, that value shows initialization out limit error in 33.4 version. if Vmax=0.80 in 33.9 version i have to make it 0.83 or 0.84 in version 33.4 for this error to be removed. So, i have to do this tuning exercise again and again. Extremely annoying. Anyone else facing same issue?

edit retag flag offensive close merge delete

add a comment

0

answered 2022-11-16 14:17:18 -0500

Berwin

103 ●2 ●3 ●10 https://psspy.org/psse...

Check with PSSE release notes. If there is no change in governor model then try checking your simulation/parameter setting and make sure those are same in both the versions.

edit flag offensive delete link

add a comment

0

answered 2022-11-12 09:53:47 -0500

CynicalSuka
11 ●6 ●7 ●9

updated 2022-11-15 13:47:36 -0500

And this happens only for governor models. Would be glad if someone could help. i have to make TRATE of GGOV1 from 300 to 301 and then suspect error is removed. but case initializes with no error TRATE=300 in 33.9 version

edit flag offensive delete link

add a comment

0

answered 2022-11-12 14:26:19 -0500

perolofl

3312 ●1 ●8 ●18

Can you show load flow and dynamic data for a generator and the error messages?

edit flag offensive delete link

Comments

Governor Data of one of the machine: Model Name Model Identifier Type R T1 (>0)(sec) V MAX V MIN T2 (sec) T3 (>0)(sec) Dt TGOV1 20100 [FPCL 132.00] 1 Stnd 0.0600 0.1000 0.8100 0.2600 2.1000 5.0000 0.0000

CynicalSuka ( 2022-11-13 00:47:50 -0500 )edit

Load flow data of that machine: Bus Number BusName VSched (pu) PGen (MW) PMax (MW) PMin (MW) QGen (Mvar) QMax (Mvar) QMin (Mvar) Mbase (MVA) 20100 FPCL 132.00 0.9800 55.0002 55.0000 17.3330 37.1853 37.1850 -29.0590 68.75

CynicalSuka ( 2022-11-13 00:49:32 -0500 )edit

it is clear that Vmax should be 0.80 or greater. i put 0.81 but still getting initialized out of limit error. i have to put 0.83 or greater for this error to be removed. this only happens in 33.4 version. in 33.9 it initializes without any error

CynicalSuka ( 2022-11-13 00:50:55 -0500 )edit

The error: Model TGOV1 Bus 20100 [FPCL 132.00] Machine "1 " : initialized out of limit(s) PMECH(I)

CynicalSuka ( 2022-11-13 00:51:28 -0500 )edit

Similar problems for other machines too.

CynicalSuka ( 2022-11-13 01:03:56 -0500 )edit

see more comments

Having issues with initializing case in 33.4 version.

3 answers

Comments

Your Answer

Question Tools

Stats

Related questions