How to add a CMLDBLU2 or CMLDBLDGU2 with low power rating (<5MW)

asked 2023-10-23 13:38:31 -0500

KiranChalla
5 ●2 ●2 ●3

I was working on the dynamic simulation of the IEEE 14 bus system with composite load models at all buses. The IEEE 14 bus test case has a load of 3.5MW on the 11th bus which is less than 5MW. While simulating this case I got a log report stating that "CMLDBLU2 At bus 11 LOAD 1 Ignored because real power= 3.5000 is less than threshold value of 5.00 MW". Is there any way to consider a composite load (CMLDBLU2/CMLDBLDGU2) with a power rating of less than 5MW? If yes, what changes are required to do that? Please help me to solve this situation.

edit retag flag offensive close merge delete

Comments

Can you show the DYRE record?

perolofl ( 2023-10-23 14:46:54 -0500 )edit

I have added my dyre file in the answer as I cant add it here as a comment

KiranChalla ( 2023-10-23 15:21:48 -0500 )edit

What disturbance are you simulating?

perolofl ( 2023-10-23 17:02:48 -0500 )edit

the disturbance is a 100ms 3-phase fault at bus 13

KiranChalla ( 2023-10-23 17:09:35 -0500 )edit

add a comment

0

answered 2023-11-21 11:41:06 -0500

boat14
51 ●7 ●8 ●12

updated 2023-11-21 11:41:28 -0500

The restriction comes from the Dynamic Simulation Options under the "Thresholds" tab. Not the dyr file.

Off the PSS/e menu bar: Dynamics > Simulation Options

See the screenshot: https://ibb.co/6nYGYDC

edit flag offensive delete link

add a comment

0

answered 2023-10-24 14:24:31 -0500

jconto
2701 ●10 ●30 ●41

The model CMLDxx does not have restriction on the size of the load to be applied to. Some 'CMLDxx writing' package (NERC has one, other) may have a restriction of Pl > 5.0 MW, which can be user-modified.

edit flag offensive delete link

add a comment

0

answered 2023-10-23 15:21:13 -0500

KiranChalla
5 ●2 ●2 ●3

Hi following is the dyre for 11th bus composite load model used in my simulation

11 'USRLOD'  '1'  'CMLDBLU2'        12    1    2  133   27  146   48   0     0

     -1.0000       0.0000      0.10000E-03  0.20000E-03  0.75000
     0.80000E-01   1.0000       1.0000       1.0000      0.90000
      1.1000      0.63000E-02   1.0250       1.0400       30.000
      5.0000       0.0000       0.0000      0.15000      0.15000
     0.10000E-01  0.30000      0.20000       1.0000      0.70000
     0.50000     -0.99700       2.0000      0.45200       1.0000
     0.54800       0.0000       2.0000     -0.50000       1.0000
      1.5000      -1.0000      3.0000      0.75000      0.40000E-01   
      1.8000      0.12000     0.10400      0.95000E-01  0.21000E-02  
      0.10000       0.0000    0.70000      0.20000E-01  0.20000       

      1.0000       99999.     0.50000      0.20000E-01  0.70000      
      0.85000      0.10000    3.0000      0.75000      0.30000E-01   
      1.8000      0.19000    0.14000      0.20000      0.26000E-02  
      0.50000       2.0000   0.60000      0.20000E-01  0.20000      
      0.75000    0.50000E-01 0.50000      0.20000E-01  0.30000      
      0.85000    0.50000E-01  3.0000      0.75000      0.30000E-01   
      1.8000      0.19000     0.14000     0.20000      0.26000E-02  
      0.10000       2.0000    0.65000      0.20000E-01  0.20000       
      1.0000       9999.0     0.50000      0.20000E-01  0.30000      
      0.85000      0.10000   0.33300E-01   0.30000      0.25000E-01   

     0.50000E-01    1.0000       0.98000       0.45000       0.10000
     0.10000        0.0000        0.0000        1.0000       6.0000        
     2.0000        12.000        3.2000         11.000       2.5000       
     0.86000       0.20000       0.95000        1.0000       -3.3000       
     0.50000       0.40000       0.60000       0.50000        15.000
     0.70000        1.9000       0.10000       0.60000      0.20000E-01   
     0.90000        9999.0       0.80000      /

edit flag offensive delete link

add a comment

How to add a CMLDBLU2 or CMLDBLDGU2 with low power rating (<5MW)

Comments

3 answers

Your Answer

Question Tools

Stats

Related questions