0

The CLODxx model does not converge in initialization

Hi All,

Thanks for reading the question.

I am testing the composite model in IEEE 9 bus system, while the CLODxx model is not converged when I initialize it for transient simulation. The case works fine without the dynamic load model (i.e., just convert the load to ZIP before running the transient simulation). I don't know what is wrong with my case.

I really appreciate if you give me some suggestions. My raw file and dyr files are pasted below, you are welcome to try.

raw file:

    0,   100.00, 32, 0, 1, 60.00     / PSS(R)E-32.2    MON, DEC 08 2014  17:27
    IEEE 9 BUS CASE - 3G - 3L

         1,'BUS1        ',  16.5000,3,   1,   1,   1,1.04000,   0.0000
         2,'BUS2        ',  18.0000,2,   2,   2,   1,1.02500,   9.2800
         3,'BUS3        ',  13.8000,2,   2,   3,   1,1.02500,   4.6648
         4,'BUS4        ', 230.0000,1,   1,   1,   1,1.02579,  -2.2168
         5,'BUS5        ', 230.0000,1,   1,   4,   2,0.99563,  -3.9888
         6,'BUS6        ', 230.0000,1,   1,   5,   2,1.01265,  -3.6874
         7,'BUS7        ', 230.0000,1,   2,   2,   1,1.02577,   3.7197
         8,'BUS8        ', 230.0000,1,   2,   6,   2,1.01588,   0.7275
         9,'BUS9        ', 230.0000,1,   2,   3,   1,1.03235,   1.9667
    0 / END OF BUS DATA, BEGIN LOAD DATA
         5,'1 ',1,   1,   1,   125.000,    50.000,     0.000,     0.000,     0.000,     0.000,   1,1
         6,'1 ',1,   1,   1,    90.000,    30.000,     0.000,     0.000,     0.000,     0.000,   1,1
         8,'1 ',1,   1,   1,   100.000,    35.000,     0.000,     0.000,     0.000,     0.000,   1,1
    0 / END OF LOAD DATA, BEGIN FIXED SHUNT DATA
    0 / END OF FIXED SHUNT DATA, BEGIN GENERATOR DATA
         1,'1 ',    71.641,    27.046,   300.000,  -300.000,1.04000,     0,   260.000, 1.00000E-4, 1.00000E-1, 0.00000E+0, 0.00000E+0,1.00000,1,  100.0,   250.000,    10.000,   1,1.0000
         2,'1 ',   163.000,     6.654,   300.000,  -300.000,1.02500,     0,   310.000, 1.00000E-4, 2.10000E-1, 0.00000E+0, 0.00000E+0,1.00000,1,  100.0,   300.000,    10.000,   1,1.0000
         3,'1 ',    85.000,   -10.860,   300.000,  -300.000,1.02500,     0,   280.000, 1.00000E-4, 2.10000E-1, 0.00000E+0, 0.00000E+0,1.00000,1,  100.0,   270.000,    10.000,   1,1.0000
    0 / END OF GENERATOR DATA, BEGIN BRANCH DATA
         4,     5,'1 ', 1.00000E-2, 8.50000E-2,   0.17600,  250.00,  250.00,  250.00,  0.00000,  0.00000,  0.00000,  0.00000,1,1,   0.00,   1,1.0000
         4,     6,'1 ', 1.70000E-2, 9.20000E-2,   0.15800,  250.00,  250.00,  250.00,  0.00000,  0.00000,  0.00000,  0.00000,1,1,   0.00,   1,1.0000
         5,     7,'1 ', 3.20000E-2, 1.61000E-1,   0.30600,  250.00,  250.00,  250.00,  0.00000 ...
(more)
Gary22212's avatar
26
Gary22212
asked 2020-02-27 16:24:56 -0500, updated 2020-02-27 16:29:13 -0500
edit flag offensive 0 remove flag close merge delete

Comments

add a comment see more comments

1 Answer

1

The parameter Branch X is too high in model CLODAL. It will work if you reduce to e.g. 0.1.

perolofl's avatar
3.8k
perolofl
answered 2020-02-28 00:15:22 -0500, updated 2020-03-02 04:47:59 -0500
edit flag offensive 0 remove flag delete link

Comments

Yes, it works after the reduction. Thank for very much!

Gary22212's avatar Gary22212 (2020-02-28 10:16:56 -0500) edit
add a comment see more comments

Your Answer

Login/Signup to Answer