dynamic simulation with load change

asked 2017-05-31 05:07:05 -0500

CF chang
1 ●2 ●3 ●2

Hi everyone,

Can I change the load with time in dynamic simulation? I’m run for psse32.

I want to set that load is followed time.

Example： To set every 1 microsecond, load will increased/ decreased 10 MW.

Thank you.

answered 2017-06-01 15:44:02 -0500

perolofl

3262 ●1 ●8 ●18

Advanced solution: By writing a user-written dynamic load model you can update the bus load at every time step. See Program Operation Guide, Chapter 21.9 for details.

Simple solution: If you don't need to change the load so frequently during the simulation you can run to t1, change the load with a load changing API, run to t2, change the load again, etc.

If you really wish to change the load every millisecond (I assume you meant millisecond and not microsecond!) you need the Advanced solution, :-)

edit flag offensive delete link

Comments

The simple solution is good enough for us new learners. But there is no Program Operation Guide in the documentaries, the most similar part might be Program Operation Manual? And the is no Chapter 21.9 either.