Dynamic Solution Parameters
What does the following dynamic solution parameters specify: 1. Freq. filter 2. Delta Threshold Intermediate, Island Freq. 3. Island Frequency Acceleration, Tolerance
First time here? We are a friendly community of Power Systems Engineers. Check out the FAQ!
What does the following dynamic solution parameters specify: 1. Freq. filter 2. Delta Threshold Intermediate, Island Freq. 3. Island Frequency Acceleration, Tolerance
This question can tell you a bit more about the frequency filter: https://psspy.org/psse-help-forum/que...
The other two relate to extended term simulations with are detailed in the Program Operation Manual 23.10. "Extended Term Simulations" (PSSE 34). The POM has this note regarding extended term simulations:
Note
Although the extended term option exists in models that were developed in the past, newer models added in the last 20 years are not able to run in midterm mode (i.e., these are not midterm ready). To make a model midterm ready, a special intergration mode needs to be developed and this has not been done. Also, vendor supplied user-written models, models not supplied as part of the standard PSS®E library, are not midterm ready. In view of this we have stopped offering the Midterm option for sale to users.
The midterm option was originally created when CPUs ran MUCH slower and CPU time/usage was a much more valuable commodity. Now, with the advent of Ghz CPUs and multiple cores, the need for this specially coded performance is no longer as great as the normal state-space simulation can still be run for long duration simulations.
The midterm activities MSTR and MRUN are still available for use, but please note that your network will most likely contain a mixture of midterm and non-midterm models. This mixture of models will NOT yield a consistent solution. For that reason, we are discouraging the use of the MSTR and MRUN activities.
Asked: 2026-05-02 09:33:14 -0500
Seen: 216 times
Last updated: May 11
Error and suspect during initialization
Frequency change on load change in dynamic simulation.
API for changing tap position in dynamic simulation
SVC and Induction Motors in the same bus
Variables in dynamic simulation
Am i able to change load values and some machine characteristics during a dynamic simulation ?
generator ramp up 90 degrees after failure. (DYRE)
Bus voltage recovery problem during dynamic simulation
whit loves you. Content on this site is licensed under a Creative Commons Attribution Share Alike 3.0 license.