Nan_MX96's profile - activity

Transformer Winding Data

Primary-H 161 kV GND Y AO=68.325 FA=91.1

Secondary-X 13.5 kV Delta

Base MVA=68.325 Base kV=13.5

Transformer Impedance Data

Windings

H to X X1= 11.0%

Transformer De-Energized Tap Changer

Tap 2 165.025

These data as I enter the transformer in PSS E.

I hope someone can support me.

Hi, Does anyone have a document or guide to tune a PSS2B.

Hello

I want to do a simulation of an excitation system, this simulation must be a system connected to the electrical network, I must use the GENSAL, ESST4B and PSS2B models in PSS E.

How should I adjust my test system, as well as how the external grid is represented.

Thanks for your help.

Hi, I need solve this question.

How to model an external network, to simulate the national network? What model do I need or fix in the system.

Thanks for the help.

How to graph the field current (Ifd) with PSS E.

Yes, but the page did not allow me to upload images. If anyone can help me, my email is addriangonza.77@gmail.com and I share more details.

Hello, before the simulation, you need to first generate the output channels as follows, go to the dynamic tab> define simulation output (CHAN), you can test with the quantity of the machine and choose the desired bus and signal. After that run your simulation and the .out file will not be empty.

As a suggestion you can save the .dyr as .snp so that your output channels are kept safe.

I want to make a bode diagram of an excitation system test system when executing NETOMAC but it indicates a simulation error, someone knows how I can correct this error or why it appears.

Thank you for your answers

@jconto @perolofl I have not worked with codes, as it is possible to execute the two files py in PSS E 34. With a py I want to open several files and then make adjustments in parameters and with another py I want to execute the dynamic simulation. To save time.

How can I first run a py file to open some files and then another py file to run a task. How to run 2 py files or more.

How to create a py file to run a dynamic simulation using a .sav and .dyr file. And how to run it the PSSE 34

@jconto, I can't see you email, can you please write you email. I need help with some problems of PSSE my email is addriangonza.77@gmail.com, I wait your answer, thank you

There are some formulas to calculate Rsource and X source, I want to simulated an infinite bus or electrical network.

Hi @perolofl, I wrote you an email.

@jconto I check your work PLBVFU1 and I have some questions, why Greg=0 and P=12 pu ? Do yo have any email to contact you?