Dynamic simulation initialized out of limit(s)

asked 2017-06-01 16:21:06 -0500

psse_user_88
19 ●7 ●8 ●12

Hello,

I get initial conditions suspect with this error:

initialized out of limit(s) PMECH(I)/CON(J+13)

I am using IEEEG3.

How to solve this??

Thank you in advance

edit retag flag offensive close merge delete

add a comment

0

answered 2017-06-01 16:45:54 -0500

perolofl

3312 ●1 ●8 ●18

The turbine power in pu Mbase divided by a23 (CON(J+13)) is not within the limits specified by Pmax and Pmin (CON(J+4) and CON(J+5) respectively).

Either your dynamic data are wrongly set or the generator is overloaded in load flow!

Please specify all your data for the concerned generator!

edit flag offensive delete link

add a comment

0

answered 2017-06-01 17:17:01 -0500

psse_user_88
19 ●7 ●8 ●12

updated 2017-06-01 17:17:45 -0500

I have 2 generators. Pgen1=30MW,Qgen=49Mvar, Pmax=125,Pmin=0. MBASE=147 Pgen2 =98MW,Qgen=21Mvar,Pmax=125,Pmin=0. MBASE=147

I am using GENSAL for the generators.

Thank you for the reply.

edit flag offensive delete link

Comments

Load flow data are ok. The problem lies in the dynamic model IEEEG3. What are the values for a23, PMAX and PMIN in IEEEG3?

perolofl ( 2017-06-02 02:05:08 -0500 )edit

Pmax=0.875 Pmin=0.425 a23=1

psse_user_88 ( 2017-06-02 03:34:33 -0500 )edit

Pmin in model IEEEG3 is 0.425x147 = 62.475 MW while in load flow Pgen1 is only 30 MW. The dynamic power limits are not matching the load flow limits of Pmin=0 and Pmax=125 MW. Increase Pgen1 or decrease Pmin in IEEEG3!

perolofl ( 2017-06-02 05:20:08 -0500 )edit

thank you, it solved the issue.

psse_user_88 ( 2017-06-02 17:48:16 -0500 )edit

I face the same problem for IEEEG1, Can you help please

yaya ( 2017-06-05 07:38:45 -0500 )edit

see more comments

Dynamic simulation initialized out of limit(s)

2 answers

Comments

Your Answer

Question Tools

Stats