Revision history [back]

My 2 cents:

• Open your case and dynamics in PSS/E
• Dynamics (tab at top) -> List -> Model Storage Locations
• Wind Machines -> Selected subsystem -> OK. This output will tell you where the storage locations are.
• Now, from the Models.pdf, you can get the offsets of each channel from the base positions. A command to monitor that channel might look something like this:
• BATSTATECHANNEL, -1, 123456, 'Iq_MyGenerator'

My 2 cents:

• Open your case and dynamics in PSS/E
• Dynamics (tab at top) -> List -> Model Storage Locations
• Wind Machines -> Selected subsystem -> OK. This output will tell you where the storage locations are.
• Now, from the Models.pdf, you can get the offsets of each channel from the base positions. A command to monitor that channel might look something like this:
• BATSTATECHANNEL, -1, 123456, 'Iq_MyGenerator'

My 2 cents:

• Open your case and dynamics in PSS/E
• Dynamics (tab at top) -> List -> Model Storage Locations
• Wind Machines -> Selected subsystem -> OK. This output will tell you where the storage locations are.
• Now, from the Models.pdf, you can get the offsets of each channel from the base positions. A command to monitor that channel might look something like this:
• BATSTATECHANNEL, BAT_STATE_CHANNEL, -1, 123456, 'Iq_MyGenerator' 'Iq_MyGenerator'