wassup_doc's profile - overview

● Citizen Patrol   × 1

● Critic   × 1

• Camp's Asphalt Sealing

● Supporter   × 1

• PSS/e 34 dyntools module

● Scholar   × 1

• Convention for adding code comments to PSS/E data files? (.raw, .dyr, etc)

● Student   × 1

• Why would PU bus voltages blow up to infinity in a FLAT dynamic simulation?

● Notable Question   × 11

• Dyntools error? "no attribute 'xdata'"
• Completing a STRT when GE wind Models are used
• Turn off all loads in a zone.
• How to query the time remaining on a USB hardware lock?
• Convention for adding code comments to PSS/E data files? (.raw, .dyr, etc)
• Why would PU bus voltages blow up to infinity in a FLAT dynamic simulation?
• parallel dynamic simulations using python and PSS/E
• "Connection Tables Full" when running dyre for dynamic simulation
• How to test Buses for Over-Voltage in Dynamic Simulation
• Process for successfully stopping, saving, loading, and restarting a Dynamic Simulation via Python API?
• Dynamic Simulation Bus Monitoring (psspy.chsb) Pointer Limit?

● Nice Answer   × 2

• Suppress PSSE output entirely
• how to calculate Zbus matrix for each change in configuration to a 39 bus system in psse??

● Taxonomist   × 1

● Good Answer   × 1

• Suppress PSSE output entirely

● Enlightened   × 1

• Suppress PSSE output entirely

● Famous Question   × 11

• How to query the time remaining on a USB hardware lock?
• Turn off all loads in a zone.
• Dyntools error? "no attribute 'xdata'"
• Completing a STRT when GE wind Models are used
• Convention for adding code comments to PSS/E data files? (.raw, .dyr, etc)
• Why would PU bus voltages blow up to infinity in a FLAT dynamic simulation?
• parallel dynamic simulations using python and PSS/E
• How to test Buses for Over-Voltage in Dynamic Simulation
• "Connection Tables Full" when running dyre for dynamic simulation
• Process for successfully stopping, saving, loading, and restarting a Dynamic Simulation via Python API?
• Dynamic Simulation Bus Monitoring (psspy.chsb) Pointer Limit?

● Editor   × 1

• Why would PU bus voltages blow up to infinity in a FLAT dynamic simulation?

● Self-Learner   × 1

• Why would PU bus voltages blow up to infinity in a FLAT dynamic simulation?

● Teacher   × 1

• Why would PU bus voltages blow up to infinity in a FLAT dynamic simulation?

● Commentator   × 1

• "Connection Tables Full" when running dyre for dynamic simulation

● Enthusiast   × 1

● Popular Question   × 11

• Dyntools error? "no attribute 'xdata'"
• Completing a STRT when GE wind Models are used
• Turn off all loads in a zone.
• How to query the time remaining on a USB hardware lock?
• Convention for adding code comments to PSS/E data files? (.raw, .dyr, etc)
• Why would PU bus voltages blow up to infinity in a FLAT dynamic simulation?
• "Connection Tables Full" when running dyre for dynamic simulation
• parallel dynamic simulations using python and PSS/E
• How to test Buses for Over-Voltage in Dynamic Simulation
• Process for successfully stopping, saving, loading, and restarting a Dynamic Simulation via Python API?
• Dynamic Simulation Bus Monitoring (psspy.chsb) Pointer Limit?