Ask Your Question

Revision history [back]

click to hide/show revision 1
initial version

Model Initialization Error in PSSE v33

Hi, I added a user-define model (CMLDBLU1) to savnw.dyr, and everything works fine with PSSE version 34. But, I get error with version 33 (as shown below) and keep getting NaN for all of my outputs. I looked at the user manual for both versions, but I couldn't find any difference. Would someone please help me run my .dyr file on version 33 and point out my mistake? Also, what does the last line of the machine initial condition (1 0.0 0.000E+00 0.0000E+00) mean? Thanks!

link to my .dyr file: https://www.dropbox.com/sh/gcqetsi7pps2njk/AAD6olgpyeCoovB9k1ce2eD_a?dl=0

INITIAL CONDITION LOAD FLOW USED 10 ITERATIONS

----------------------------- MACHINE INITIAL CONDITIONS -----------------------------

BUS# X-- NAME --X BASKV ID ETERM EFD POWER VARS P.F. ANGLE ID IQ

101 NUC-A       21.600 1  1.0111 2.1268  766.57  109.31 0.9900  62.83 0.6961 0.4894
102 NUC-B       21.600 1  1.0111 2.1268  766.57  109.31 0.9900  62.83 0.6961 0.4894
206 URBGEN      18.000 1  1.0383 2.6138  842.16  597.67 0.8155  23.52 0.8821 0.4596
211 HYDRO_G     20.000 1  1.0310 1.6570  616.80   36.58 0.9982  42.30 0.4536 0.6910
3011 MINE_G      13.800 1  1.0325 1.3944  287.71   68.67 0.9727  18.30 0.1531 0.2421
3018 CATDOG_G    13.800 1  1.0359 3.0400  105.32   82.19 0.7884  22.12 0.8984 0.4206
1   0.0                                     0.0000E+00     0.0000E+00

INITIAL CONDITIONS SUSPECT:

  I   DSTATE(I)    STATE(I)     MODEL             STATE     BUS# X-- NAME --X BASKV  ID
 84  -0.70458E-02  0.10569      CMLDBLU1           K+20      153 MID230      230.00  1
 85  -0.70458E-02  0.10569      CMLDBLU1           K+21      153 MID230      230.00  1