Revision history [back]

Hi, I work with an offshore distribution system and want to know if someone can point me to a python script that will create a load list? A load list will sort consumers according to the busbar that they are supplied from and show the power consumption of individual loads as well as the total load of the busbar.

Best regards Bruce

Hi, I work with an offshore distribution system and want to know if someone can point me to a python script that will create a load list? A load list will sort consumers according to the busbar that they are supplied from and show the power consumption of individual loads as well as the total load of the busbar. busbar.

The end report would look something like this

Report for Bus A

Consumer 1 10 kW Consumer 1 20 kW Tranformer to bus B 10 kW .. Total for Bus A 40 kW

And then a new section, or page for the next bus.

Best regards Bruce

Hi, I work with an offshore distribution system and want to know if someone can point me to a python script that will create a load list? A load list will sort consumers according to the busbar that they are supplied from and show the power consumption of individual loads as well as the total load of the busbar.

The end report would look something like this

Report for Bus A

Consumer 1 10 kW Consumer 1 20 kW Tranformer to bus B 10 kW .. Total for Bus A 40 kW

And then a new section, or page for the next bus.

Best regards Bruce

Hi, I work with an offshore distribution system and want to know if someone can point me to a python script that will create a load list? A load list will sort consumers according to the busbar that they are supplied from and show the power consumption of individual loads as well as the total load of the busbar.

The end report would look something like this

Report for Bus A

Hi, I work with an offshore distribution system and want to know if someone can point me to a python script that will create a load list? A load list will sort consumers according to the busbar that they are supplied from and show the power consumption of individual loads as well as the total load of the busbar.

The end report would look something like this

Report for Bus A

• Consumer 1 10 kW

• Consumer 2 20 kW

-

Tranformer to bus B 10 kW

• Total for Bus A 40 kW

And then a new section, sections, or page pages for the next bus.other buses (switchboards) in the case.

Best regards Bruce

Hi, I work with an offshore distribution system and want to know if someone can point me to a python script that will create a load list? A load list will sort consumers according to the busbar that they are supplied from and show the power consumption of individual loads as well as the total load of the busbar.

The end report would look something like this

Report for Bus A

• Consumer 1 Motor 10 kW
• Consumer 2 Heater 20 kW
• Tranformer to bus B 10 kW
• Total for Bus A 40 kW

And then a new sections, or pages for the other buses (switchboards) in the case.

Best regards Bruce