First time here? We are a friendly community of Power Systems Engineers. Check out the FAQ!
I found the raw data online but all buses are at same voltage level. In original case, I found that all buses are not at same voltage. Please help!!
See post "can u send dynamic data for IEEE-24 bus and IEEE-30 bus system" to get my version of the IEEE 14 bus system (topology remain, different generation dispatch and loading, more suitable for dynamic studies) .
The original IEEE 14-bus translated from its cdf version is below:
0, 100.00, 33, 0, 1, 60.00 / PSS(R)E-33.12 MON, OCT 29 2018 19:57
08/19/93 UW ARCHIVE 100.0 1962 W
IEEE 14 BUS TEST CASE
1,'BUS 1 ', 0.0000,3, 1, 1, 1,1.06000, 0.0000,1.10000,0.90000,1.10000,0.90000
2,'BUS 2 ', 0.0000,2, 1, 1, 1,1.04500, -4.9680,1.10000,0.90000,1.10000,0.90000
3,'BUS 3 ', 0.0000,2, 1, 1, 1,1.01000, -12.6768,1.10000,0.90000,1.10000,0.90000
4,'BUS 4 ', 0.0000,1, 1, 1, 1,1.02371, -10.3822,1.10000,0.90000,1.10000,0.90000
5,'BUS 5 ', 0.0000,1, 1, 1, 1,1.02809, -8.8636,1.10000,0.90000,1.10000,0.90000
6,'BUS 6 ', 0.0000,2, 1, 1, 1,1.03854, -14.6164,1.10000,0.90000,1.10000,0.90000
7,'BUS 7 ', 0.0000,1, 1, 1, 1,1.04612, -13.6563,1.10000,0.90000,1.10000,0.90000
8,'BUS 8 ', 0.0000,2, 1, 1, 1,1.08508, -13.6563,1.10000,0.90000,1.10000,0.90000
9,'BUS 9 ', 0.0000,1, 1, 1, 1,1.03491, -15.3593,1.10000,0.90000,1.10000,0.90000
10,'BUS 10 ', 0.0000,1, 1, 1, 1,1.02799, -15.5332,1.10000,0.90000,1.10000,0.90000
11,'BUS 11 ', 0.0000,1, 1, 1, 1,1.02970, -15.2202,1.10000,0.90000,1.10000,0.90000
12,'BUS 12 ', 0.0000,1, 1, 1, 1,1.02405, -15.5147,1.10000,0.90000,1.10000,0.90000
13,'BUS 13 ', 0.0000,1, 1, 1, 1,1.01992, -15.6089,1.10000,0.90000,1.10000,0.90000
14,'BUS 14 ', 0.0000,1, 1, 1, 1,1.00994, -16.5202,1.10000,0.90000,1.10000,0.90000
0 / END OF BUS DATA, BEGIN LOAD DATA
2,'1 ',1, 1, 1, 21.700, 12.700, 0.000, 0.000, 0.000, 0.000, 1,1,0
3,'1 ',1, 1, 1, 94.200, 19.000, 0.000, 0.000, 0.000, 0.000, 1,1,0
4,'1 ',1, 1, 1, 47.800, -3.900, 0.000, 0.000, 0.000, 0.000, 1,1,0
5,'1 ',1, 1, 1, 7.600, 1.600, 0.000, 0.000, 0.000, 0.000, 1,1,0
6,'1 ',1, 1, 1, 11.200, 7.500, 0.000, 0.000, 0.000, 0.000, 1,1,0
9,'1 ',1, 1, 1, 29.500, 16.600, 0.000, 0.000, 0.000, 0.000, 1,1 ...Hi Jconto, thank you so much!! But why did you split the generator MW of generator 1 to other generators? The original IEEE 14 bus test case is different from what you have modeled as given in the link "https://egriddata.org/sites/default/files/ieee14cdf.txt".
I posted the original IEEE 14 network data for PSSev33 above. I modified the original dispatch & loading to suit better dynamic studies.
Thank you so much Jconto. I tried to replace the conventional generator at bus 2 with photovoltaic system, but I could not find the PVGU1 model, there is only REGCA1 and other wind system models. How can I add that model from PSSE GUI?
PVGUI is listed in Chp. 17, Models manual under Wind generator models. You can check my post "Renewable Plant Modeling - Solar PV - Wind" for a PVGUI data set.
I tried to use your code from google drive to import PVGU1/PVEU1 model in my case but it can only find REGCAU1/REPCAU1?
Asked: Oct 29 '18
Seen: 1,740 times
Last updated: Oct 29 '18
whit loves you. Content on this site is licensed under a Creative Commons Attribution Share Alike 3.0 license.
