Model Initialization Error in PSSE v33
Hi, I added a user-define model (CMLDBLU1) to savnw.dyr, and everything works fine with PSSE version 34. But, I get error with version 33 (as shown below) and keep getting NaN for all of my outputs. I looked at the user manual for both versions, but I couldn't find any difference. Would someone please help me run my .dyr file on version 33 and point out my mistake? Also, what does the last line of the machine initial condition (1 0.0 0.000E+00 0.0000E+00) mean? Thanks!
link to my .dyr file: https://www.dropbox.com/sh/gcqetsi7pp...
INITIAL CONDITION LOAD FLOW USED 10 ITERATIONS
----------------------------- MACHINE INITIAL CONDITIONS -----------------------------
BUS# X-- NAME --X BASKV ID ETERM EFD POWER VARS P.F. ANGLE ID IQ
101 NUC-A 21.600 1 1.0111 2.1268 766.57 109.31 0.9900 62.83 0.6961 0.4894
102 NUC-B 21.600 1 1.0111 2.1268 766.57 109.31 0.9900 62.83 0.6961 0.4894
206 URBGEN 18.000 1 1.0383 2.6138 842.16 597.67 0.8155 23.52 0.8821 0.4596
211 HYDRO_G 20.000 1 1.0310 1.6570 616.80 36.58 0.9982 42.30 0.4536 0.6910
3011 MINE_G 13.800 1 1.0325 1.3944 287.71 68.67 0.9727 18.30 0.1531 0.2421
3018 CATDOG_G 13.800 1 1.0359 3.0400 105.32 82.19 0.7884 22.12 0.8984 0.4206
1 0.0 0.0000E+00 0.0000E+00
INITIAL CONDITIONS SUSPECT:
I DSTATE(I) STATE(I) MODEL STATE BUS# X-- NAME --X BASKV ID
84 -0.70458E-02 0.10569 CMLDBLU1 K+20 153 MID230 230.00 1
85 -0.70458E-02 0.10569 CMLDBLU1 K+21 153 MID230 230.00 1
