Automatic export from OUT to PDF

asked 2015-05-14 02:17:01 -0600

173 ●10 ●12 ●20

Hi, folks,

I am trying to export PDF from OUT file, automatically. Everything works well, ecxept the pssplot.dragdropplotdata command. It seems the command didn't drop any thing in the plot window, which it's supposed to do.

Below here is my piece of code:

#Import from xls
import xlrd 
import os,sys
import pssplot
dir = '''D:\Huy\Test3\\'''
xls_file = dir+'Multiple_CCT.xls'       # xlsx is not acceptable
wb = xlrd.open_workbook(xls_file) 
sh = wb.sheet_by_index(0)
nr = sh.nrows 
pssplot.newplotbook()
for num in range(1,nr):
    #Read from Xls
    OUT= dir+str(int(sh.row_values(num)[0]))+"-"+ str(int(sh.row_values(num)[1]))+"-CCT0.0800s.out"
    NAME=str(int(sh.row_values(num)[0]))+"-"+ str(int(sh.row_values(num)[1]))+"-CCT0.0800s"
    pssplot.openchandatafile(OUT)
    pssplot.dragdropplotdata(NAME,r"""1 - ANGL 35201[G1 220.00]1""")
    pssplot.dragdropplotdata(NAME,r"""2 - ANGL 49502[G2 500.00]1""")
    pssplot.dragdropplotdata(NAME,r"""3 - ANGL 60501[G3 500.00]1""")
    pssplot.exportplot(dir+NAME+"_ANGLE.pdf",4)

edit retag flag offensive close merge delete

add a comment

0

answered 2020-05-25 04:11:27 -0600

jfconroy
176 ●11 ●14 ●18

I think a better approach is the following. 1) Get the data into Python from the *.out or *.outx file using the

dyntools.CHNF(outfilename)

command. 2) Use matplotlib to do the plots, which is much more flexible and has much more options than pssplot. 3) Save your graph as a pdf using matplotlib.

edit flag offensive delete link

add a comment

0

answered 2015-05-16 20:12:52 -0600

jconto
2701 ●10 ●30 ●41

updated 2020-05-19 18:04:57 -0600

I run within the PSSe GUI, v33, a similar code for a single plot and it did created the pdf as well as it showed the plot on the plot window.
My out file was 'GOP1.out' and my NAME variable was 'GOP1'. Also I made sure that the channel name exists in the OUT file.

The file plot1.zip stored at my Google drive public site contains the plot1.py script. Before run it in the PSSe GUI, update filenames and other variables for your case.

A better way to plot to pdf is with "channels", also stored at the same site.

edit flag offensive delete link

Comments

I have applied the code recorded from PSSE but it the dragdrop command just doesn't work and I don't know why. Also, I have reinstall PSSE, but the problem remain still. :(

Cao Huy ( 2015-05-17 20:26:47 -0600 )edit

Test the code I used. Check my updated answer.

jconto ( 2015-05-18 19:06:09 -0600 )edit

Just throwing this out there, but sometimes the things act strange if you have too many out files open at once, or out files of the same name. Also there is really limited error output if your out file/channel strings are wrong. Does recording with a new PSSE window and only one out file work OK?