cim5bl model

asked 2014-10-13 08:21:59 -0500

vinhnq.ovgu
1 ●1 ●1 ●1

updated 2014-10-20 05:26:21 -0500

JervisW
1308 ●20 ●35 ●55

Hello friends, I am using cim5bl model for my dynamic studying. When I check DOCU for the model parameters, I get the notice as following:

*Model CIM5BL Bus 6 [10BBA       10.000] Load "4 " :
 Derived constant T" =      0.0031, outside of range > 0.0400 and < 0.2
 Derived constant X =      2.8900, outside of range > 0.0 and < 2.5
 Model CIM5BL is applied to bus 6 [10BBA       10.000] using load identifier "4"
    I C O N       C O N S     S T A T E S     V A R S      RES-ICONS
         8         86-104        46-51         10-20         74-77
     RA        XA        XM        R1        X1        R2        X2
    0.0300    0.0900    2.8000    0.0250    0.1100    0.1500    0.0400
     E1        S(E1)     E2        S(E2)     MBASE     PMULT     H
    1.0000    0.0400    1.2000    0.2000    2.9000    1.0000    0.5100
     VI        TI        TB        D       SYN-TOR        MOTOR TYPE
    0.0000    0.1000    0.1000    0.2100    0.0000             1*

How can I solve this problem? Trying to find out a formula about T'' and X but failed. I appreciate your answer and thank you so much!

edit retag flag offensive close merge delete

Comments

Thanks for editing, JervisW

vinhnq.ovgu ( 2014-10-20 13:38:23 -0500 )edit

add a comment

1

answered 2014-10-15 08:21:56 -0500

Cao Huy

173 ●10 ●12 ●20

Please check out the section below (PSSE33) in PVAG2.pdf in PSSE folder. It has formulas to calculate T'' and X from Xa, Xm, X1, X2, w0 and R2.

20.2.6.0.1 Data Conversion From One Model Representation to Another.

edit flag offensive delete link

add a comment

0

answered 2014-10-15 09:39:03 -0500

vinhnq.ovgu
1 ●1 ●1 ●1

Thanks Cao Huy for your useful info. I found the solution couple days ago and now I am dealing with another problem. When I do the process for studying a dynamic case, no fault in DOCU and Initialization checking, even passed RUN step but when I open the .out file, PSSE has been "No responding" and I can not see the result. Could you or somebody give me your experience in this case? What is your processing for checking error in my situation? Thanks in advance!

edit flag offensive delete link

Comments

You may want to check time step of your simulation. Sometimes. when I use simulation time step which isn't small enoungh (maybe bigger than a particular time constant of models), the output files I got has nothing. To modify your time step, click on dynamic solution parameter on dynamic toolbar.

Cao Huy ( 2014-10-16 01:23:34 -0500 )edit

Btw, would you mind tell me how did you deal with the problem? What parameter did you adjust?

Cao Huy ( 2014-10-16 01:26:13 -0500 )edit

I know about the proportional relation between them, so I adjusted reactance values to satisfy the requirements (because my input data some way are wrong when I got it). I will try your advice with my problem now. Thanks a lot!

vinhnq.ovgu ( 2014-10-16 03:07:16 -0500 )edit

Hi Cao Huy, thought that I should cheer you a beer! It works when I try with your advice and now the result display very very clearly. Actually I ve met this trouble once and found the solution but I forgot that at the moment until you remind me about the time step. Once again, thanks so much!

vinhnq.ovgu ( 2014-10-16 07:35:53 -0500 )edit

You're welcome. I'm glad it helped.

Cao Huy ( 2014-10-16 20:42:39 -0500 )edit

see more comments

cim5bl model

Comments

2 answers

Comments

Your Answer

Question Tools

Stats