Why I cannot initialize and run the dynamic simulation

asked 2024-10-10 12:45:58 -0600

Ewis
11 ●5 ●5 ●8

updated 2024-10-11 09:52:04 -0600

jconto
2701 ●10 ●30 ●41

I run a load flow for a case , it converges normally. When I try STRT and initializing the dynamic simulation , it does not converge .

I got this msg INITIAL CONDITION LOAD FLOW USED 1 ITERATIONS

Then: Network not converged at TIME = -0.002

INITIAL CONDITIONS SUSPECT:

I DSTATE(I) STATE(I) MODEL STATE BUS# X-- NAME --X BASKV ID 
2 0.92452E-02 0.53758 GENROU K+1 94000 P.CRUZ 400.00 1 
3 0.35834E-01 0.81847 GENROU K+2 94000 P.CRUZ 400.00 1 
4 0.16281 0.66431 GENROU K+3 94000 P.CRUZ 400.00 1 
8 0.92452E-02 0.53758 GENROU K+1 94000 P.CRUZ 400.00 2 
9 0.35834E-01 0.81847 GENROU K+2 94000 P.CRUZ 400.00 2 
10 0.16281 0.66431 GENROU K+3 94000 P.CRUZ 400.00 2 
14 0.90782E-02 0.52339 GENROU K+1 94000 P.CRUZ 400.00 3

edit retag flag offensive close merge delete

Comments

What do you mean with not converge? Please specify the problem. Initial conditions suspect?

perolofl ( 2024-10-11 02:16:05 -0600 )edit

add a comment

1

answered 2024-10-11 10:15:32 -0600

jconto
2701 ●10 ●30 ●41

did the dynamic data set initialized well before? what has changed? are the model somehow validated?

When machine models (GENROU, etc.) appear in the initial condition suspect table, check their models parameter values. Check that all generators in the basecase are within its limits (Pmin < Pgen < Pmax and also Qmin < Qgen < Qmax), including the swing generator. Also check if governor models are in this table, since they affect the Pgen value, and adjust their parameters (mainly Pmax) to resolve the suspect condition. The DSTATE shall be as close to zero as possible, so work first on those machines with the largest DSTATE value (like I=4, I=10)

edit flag offensive delete link

add a comment

0

answered 2024-10-11 09:41:12 -0600

Ewis
11 ●5 ●5 ●8

I got this msg INITIAL CONDITION LOAD FLOW USED 1 ITERATIONS

Then: Network not converged at TIME = -0.002

INITIAL CONDITIONS SUSPECT: I DSTATE(I) STATE(I) MODEL STATE BUS# X-- NAME --X BASKV ID 2 0.92452E-02 0.53758 GENROU K+1 94000 P.CRUZ 400.00 1 3 0.35834E-01 0.81847 GENROU K+2 94000 P.CRUZ 400.00 1 4 0.16281 0.66431 GENROU K+3 94000 P.CRUZ 400.00 1 8 0.92452E-02 0.53758 GENROU K+1 94000 P.CRUZ 400.00 2 9 0.35834E-01 0.81847 GENROU K+2 94000 P.CRUZ 400.00 2 10 0.16281 0.66431 GENROU K+3 94000 P.CRUZ 400.00 2 14 0.90782E-02 0.52339 GENROU K+1 94000 P.CRUZ 400.00 3

edit flag offensive delete link

add a comment

Why I cannot initialize and run the dynamic simulation

Comments

2 answers

Your Answer

Question Tools

Stats