Problems stopping PSS/E while running dynamic simulation
I was trying to simulate the ieee14 case in dynamic model, but everywhen I added both OLTC1 and relay F21 in a .dyr file, PSS/E -33 said that it has stopped working. And it goes normally with one kind of models.
Is that RXR1 and OLTCT1 can't go together and how to add both of them in a dyr file without error.
Thanks in advance.
Following is my .dyr file.
1 'GENSAE' 1 7.4000 0.30000E-01 0.33000E-01 5.1480 2.0000 0.89790 0.64600 0.29950 0.23000 0.23960 0.0000 0.0000 / 1 'STAB1' 1 5.0100 10.000 19.000 0.20000E-01 19.000 0.20000E-01 0.10000 / 1 'IEEEX1' 1 0.10000E-01 200.00 0.20000E-01 0.0000 0.0000 7.3200 -5.0000 1.0000 0.19000 0.12000E-02 1.0000 0.0000 0.0000 0.0000 0.0000 0.0000 / 2 'GENSAE' 1 6.1000 0.40000E-01 0.99000E-01 6.5400 2.0000 1.0500 0.98000 0.18500 0.13000 0.0000 0.0000 0.0000 / 2 'IEEEX1' 1 0.10000E-01 20.000 0.20000E-01 0.0000 0.0000 4.3800 -5.0000 1.0000 1.9800 0.10000E-02 1.0000 0.0000 0.0000 0.0000 0.0000 0.0000 / 3 'GENSAE' 1 6.1000 0.40000E-01 0.99000E-01 6.5400 2.0000 1.0500 0.98000 0.18500 0.13000 0.0000 0.0000 0.0000 / 3 'IEEEX1' 1 0.10000E-01 20.000 0.20000E-01 0.0000 0.0000 4.3800 -5.0000 1.0000 1.9800 0.10000E-02 1.0000 0.0000 0.0000 0.0000 0.0000 0.0000 / 6 'GENSAE' 1 4.7500 0.60000E-01 0.21000 5.0600 2.0000 1.2500 1.2200 0.23200 0.12000 0.13400 0.0000 0.0000 / 6 'IEEEX1' 1 0.10000E-01 20.000 0.20000E-01 0.0000 0.0000 6.8100 -5.0000 1.0000 0.70000 0.10000E-02 1.0000 0.0000 0.0000 0.0000 0.0000 0.0000 / 8 'GENSAE' 1 4.7500 0.60000E-01 0.21000 5.0600 2.0000 1.2500 1.2200 0.23200 0.12000 0.13400 0.0000 0.0000 / 8 'IEEEX1' 1 0.10000E-01 20.000 0.20000E-01 0.0000 0.0000 6.8100 -5.0000 1.0000 0.70000 0.10000E-02 1.0000 0.0000 0.0000 0.0000 0.0000 0.0000 /4,'OLTC1T',9,1,20,0,2.5/ 1,'RXR1',2,1,1,1,1,2,1,1,2,1,1,2,1,0.0056,-0.0018,0.0373,0.0947,0.0248,0.0947,0.0692,0.1618,0.0423,0.1618,0.0000,0.0000,0.0142,-0.0055,0.1559,0.3591,0.0788,0.3591,0.0000,0.2604,0.0342,-0.0255,0.1759,0.3791,-0.0200,0.3791,-0.0200,-0.0255,0.5,15,30,10000000,0,0.5,10000000,10000000,10000000/ 1,'RXR1',2,2,1,1,1,2,1,1,2 ...
.jpg "MAJID"){kind=small}
Do you get an error message?
No. There was a window said that "PSSE has stopped working." It seems to be unable to add relay and oltc through dyr file. But, I've tried and sucessfully added relays and oltcs for PSSE version 29 by idv file. Anw, I'm still looking for the reason.
When does it crash? You should have some output indicating something is not correct in the output. If it crashes too quickly before you have a chance to read all the output, change your settings so that progress reports are sent to a .txt file instead of the standard report window.