Revision history [back]

Hi Everyone,

I found a multi-terminal HVDC link data (e.g. MULTERMDC1) shown below of sample.sav in the PSSE example folder and I trierd to input the data into IEEE39 network system.

Bus for Line 'MULTERMDC1" 1 DC1 2 1 1 1 0.000 0 2 DC2 1 1 1 1 0.000 0 3 DC3 3 1 1 1 0.000 0 4 DC4 None 1 1 1 0.000 0

However, the error message listed below popped out and the data cannot be entried sucessfully.

Messages for dc circuit "1" from 1 to 1 of multi-terminal dc line "": (002068) FATAL: Dc line "" not found (002061)

So, how to deal with the error for constructing a multi-terminal dc link in PSS\E. Besides, can PSS\E allows to construct a multi-terminal HVDC with VSC DC link ?

Thank you so much!

Hi Everyone,

I found a multi-terminal HVDC link data (e.g. MULTERMDC1) shown below of sample.sav in the PSSE example folder and I trierd to input the data into IEEE39 network system.

Bus for Line 'MULTERMDC1" 1"

1 DC1 2 1 1 1 0.000 0 0

2 DC2 1 1 1 1 0.000 0 0

3 DC3 3 1 1 1 0.000 0 0

4 DC4 None 1 1 1 0.000 0

However, the error message listed below popped out and the data cannot be entried sucessfully.

Messages for dc circuit "1" from 1 to 1 of multi-terminal dc line "": (002068) FATAL: Dc line "" not found (002061)

So, how to deal with the error for constructing a multi-terminal dc link in PSS\E. Besides, can PSS\E allows to construct a multi-terminal HVDC with VSC DC link ?

Thank you so much!

Hi Everyone,

I found a multi-terminal HVDC link data (e.g. MULTERMDC1) shown below of sample.sav in the PSSE example folder and I trierd to input the data into the IEEE39 network system.

Bus for Line 'MULTERMDC1"

1 DC1 2 1 1 1 0.000 0

2 DC2 1 1 1 1 0.000 0

3 DC3 3 1 1 1 0.000 0

4 DC4 None 1 1 1 0.000 0

However, the error message listed below popped out and the data cannot be entried sucessfully.

Messages for dc circuit "1" from 1 to 1 of multi-terminal dc line "": (002068) FATAL: Dc line "" not found (002061)

So, how to deal with the error for constructing a multi-terminal dc link in PSS\E. Besides, can PSS\E allows to construct a multi-terminal HVDC with VSC DC link ?

Thank you so much!

Hi Everyone,

I found a multi-terminal HVDC link data (e.g. MULTERMDC1) shown below of sample.sav in the PSSE example folder and I trierd to input the data into the IEEE39 network system.

Bus for Line 'MULTERMDC1"

1 DC1 2 1 1 1 0.000 0

2 DC2 1 1 1 1 0.000 0

3 DC3 3 1 1 1 0.000 0

4 DC4 None 1 1 1 0.000 0

However, the error message listed below popped out and the data cannot be entried enetered sucessfully.

Messages for dc circuit "1" from 1 to 1 of multi-terminal dc line "": (002068) FATAL: Dc line "" not found (002061)

So, how to deal with the error for constructing a multi-terminal dc link in PSS\E. Besides, can PSS\E allows to construct a multi-terminal HVDC with VSC DC link ?

Thank you so much!

Hi Everyone,

I found a multi-terminal HVDC link data (e.g. MULTERMDC1) shown below of sample.sav in the PSSE example folder and I trierd to input the data into the IEEE39 network system.

Bus for Line 'MULTERMDC1"

1 DC1 2 1 1 1 0.000 0

2 DC2 1 1 1 1 0.000 0

3 DC3 3 1 1 1 0.000 0

4 DC4 None 1 1 1 0.000 0

However, the error message listed below popped out and the data cannot be enetered sucessfully.successfully.

Messages for dc circuit "1" from 1 to 1 of multi-terminal dc line "": (002068) FATAL: Dc line "" not found (002061)

So, how to deal with the error for constructing a multi-terminal dc link in PSS\E. Besides, can PSS\E allows to construct a multi-terminal HVDC with VSC DC link ?

Thank you so much!

Hi Everyone,

I found would like to know whether PSS\E can perform the load flow and transient stability analysis for a multi-terminal HVDC link data (e.g. MULTERMDC1) shown below of sample.sav in the PSSE example folder and I trierd to input the data into the IEEE39 network system.

Bus for Line 'MULTERMDC1"

1 power sytem with DC1 2 1 1 1 0.000 0

2 DC2 1 1 1 1 0.000 0

3 DC3 3 1 1 1 0.000 0

4 DC4 None 1 1 1 0.000 0

However, the error message listed below popped out and the data cannot be enetered successfully.

Messages for dc circuit "1" from 1 to 1 of multi-terminal dc line "": (002068) FATAL: Dc line "" not found (002061)

So, how to deal with the error for constructing a multi-terminal dc link in PSS\E. Besides, can PSS\E allows to construct a multi-terminal HVDC with VSC DC link ?

Thank you so much!

Hi Everyone,

I would like to know whether PSS\E can perform the load flow and transient stability analysis for a power sytem with multi-terminal HVDC with VSC DC link ?

Thank you so much!