First time here? We are a friendly community of Power Systems Engineers. Check out the FAQ!
2017-08-30 09:53:00 -0500 | commented answer | How do you run a dynamic simulation for CIM5BL model Thanks JConto, I was trying to understand the parameters for CIM5BL and am not to clear on Tnom. Is it necessary to derive a value for it or can I just use 0. Tnom seems to affect the duration in which the voltage recovers when the motor reaches full speed. Any advice helps. Many thanks. |
2017-08-15 16:58:02 -0500 | received badge | ● Famous Question (source) |
2017-07-20 15:34:31 -0500 | received badge | ● Notable Question (source) |
2017-07-17 10:06:21 -0500 | commented answer | How do you run a dynamic simulation for CIM5BL model Thanks JConto for your reply. As for following your example, my question still pertains setting up the data for the load at bus 154. In the sample savnw.sav file that I have for PSSE v33, there is no load in the network data. My question is how do I setup that load in the savnw.sav file. Many thanks |
2017-07-17 09:41:30 -0500 | received badge | ● Popular Question (source) |
2017-07-13 23:54:58 -0500 | asked a question | How do you run a dynamic simulation for CIM5BL model Would anyone be able to describe what my PSSE RAW and SEQ motor model should look like when I perform dynamics using a CIM5BL motor model? Should I be entering "machine" data or "load" data in the network data section? The instructions in the PSSE manual is not as straight forward. Many thanks in advance |