Revision history [back]
 | 1 | initial version |
BAT_DIST_BUS_FAULT command
I'm automating PSSE for a dynamic simulation and I came across this batch command :
BATDISTBUS_FAULT IBUS UNITS BASEKV VALUES(1) VALUES(2)
When defining a fault impedance/admittance here, we can define it by MVA. But I'm not sure what they mean by defining a fault impedance/ admittance in MVA.
Can anyone explain me the formula for this?
| | 2 | No.2 Revision |
BAT_DIST_BUS_FAULT command
I'm automating PSSE for a dynamic simulation and I came across this batch command :
BATDISTBUS_FAULT IBUS UNITS BASEKV VALUES(1) VALUES(2)
When defining a fault impedance/admittance here, we can define it by MVA. But I'm not sure what they mean by defining a fault impedance/ admittance in MVA.
Can anyone explain me the formula for this?
| | 3 | No.3 Revision |
BAT_DIST_BUS_FAULT command
I'm automating PSSE for a dynamic simulation and I came across this batch command :
BAT"BATDISTBUS_FAULT IBUS UNITS BASEKV VALUES(1) VALUES(2)VALUES(2)"
When defining a fault impedance/admittance here, we can define it by MVA. But I'm not sure what they mean by defining a fault impedance/ admittance in MVA.
Can anyone explain me the formula for this?
| | 4 | No.4 Revision |
BAT_DIST_BUS_FAULT command
I'm automating PSSE for a dynamic simulation and I came across this batch command :
"BATDISTBUS_FAULT IBUS UNITS BASEKV VALUES(1) VALUES(2)"
When defining a fault impedance/admittance here, we can define it by MVA. But I'm not sure what they mean by defining a fault impedance/ admittance in MVA.
Can anyone explain me the formula for this?
