Revision history [back]
 | 1 | initial version |
The customizated unit in PSSE/33 has no response
I've construced a GENTPJ model in PSS/E 34, and it had run succesfully, then I tried to have this model in PSS/E33 to do the same simulation. after I transfer this model into PSS/E33. I found that there has no response of the model, and I enforce to run the simulation, it did has some data, but it's different from PSS/E 34. I was wondering what's the response in each version of PSS/E? Or should I have run the simulation in the different way? Please let me know if there has any solution, It's gonna help me a lot. Thank you.
| | 2 | retagged |
The customizated unit in PSSE/33 has no response
I've construced a GENTPJ model in PSS/E 34, and it had run succesfully, then I tried to have this model in PSS/E33 to do the same simulation. after I transfer this model into PSS/E33. I found that there has no response of the model, and I enforce to run the simulation, it did has some data, but it's different from PSS/E 34. I was wondering what's the response in each version of PSS/E? Or should I have run the simulation in the different way? Please let me know if there has any solution, It's gonna help me a lot. Thank you.
| | 3 | retagged |
The customizated unit in PSSE/33 has no response
I've construced a GENTPJ model in PSS/E 34, and it had run succesfully, then I tried to have this model in PSS/E33 to do the same simulation. after I transfer this model into PSS/E33. I found that there has no response of the model, and I enforce to run the simulation, it did has some data, but it's different from PSS/E 34. I was wondering what's the response in each version of PSS/E? Or should I have run the simulation in the different way? Please let me know if there has any solution, It's gonna help me a lot. Thank you.
