Revision history [back]

In the REPCA model Vref=Vreg+Kc*Qbranch(pu) [1] with RfFlag=1 I have to do the following test: verifying model responds to the voltage reference set point step test from 1.0146 pu to 1.0222 pu at POI bus. Initialy (flat start) Vref=1.0142 due to the ecuation 1 (instead of the LF voltaje 1.0146). If I want to increase the reference setpoint to 1.022, how should I change VAR(L)?