Revision history [back]

Dear experts, I am trying to link the auxiliary signal model PAUX1T with the CBEST model in order to create a simple frequency primary regulator. In the .dyr file I have: 4, 'CBEST', 1, 4.0000, 1.1000, 0.90000, 1.0000, 1.0000, 0.0000, 0.0000, 0.50000E-01, 0.0000, 10.000, -10.000, 0.50000E-02/ 4, 'PAUX1T', 4, 1, 7, 0.01, 0.005, -20, 4, -4 /

(I am whatching the frequency of the 7th bus)

But still, when I activate the dyr file in PSS-E, I cannot see the PAUX1T anywhere. I've been reading that many have been using such combination of models, but I don't know how is that possible, since CBEST is a generator model and not a FACTS device (or two-terminal dc line, or multi-terminal dc line, or VSC dc line).

I am looking forward for your help!

Thank you in advance!

Dear experts, I am trying to link the auxiliary signal model PAUX1T with the CBEST model in order to create a simple frequency primary regulator. In the .dyr file I have: 4, 'CBEST', 1, 4.0000, 1.1000, 0.90000, 1.0000, 1.0000, 0.0000, 0.0000, 0.50000E-01, 0.0000, 10.000, -10.000, 0.50000E-02/ 0.50000E-02/

4, 'PAUX1T', 4, 1, 7, 0.01, 0.005, -20, 4, -4 /

(I am whatching the frequency of the 7th bus)

But still, when I activate the dyr file in PSS-E, I cannot see the PAUX1T anywhere. I've been reading that many have been using such combination of models, but I don't know how is that possible, since CBEST is a generator model and not a FACTS device (or two-terminal dc line, or multi-terminal dc line, or VSC dc line).

I am looking forward for your help!

Thank you in advance!

Dear experts, I am trying to link the auxiliary signal model PAUX1T with the CBEST model in order to create a simple frequency primary regulator. In the .dyr file I have: have:

4, 'CBEST', 1, 4.0000, 1.1000, 0.90000, 1.0000, 1.0000, 0.0000, 0.0000, 0.50000E-01, 0.0000, 10.000, -10.000, 0.50000E-02/

4, 'PAUX1T', 4, 1, 7, 0.01, 0.005, -20, 4, -4 /

(I am whatching the frequency of the 7th bus)

But still, when I activate the dyr file in PSS-E, I cannot see the PAUX1T anywhere. I've been reading that many have been using such combination of models, but I don't know how is that possible, since CBEST is a generator model and not a FACTS device (or two-terminal dc line, or multi-terminal dc line, or VSC dc line).

I am looking forward for your help!

Thank you in advance!

Dear experts, I am trying to link the auxiliary signal model PAUX1T with the CBEST model in order to create a simple frequency primary regulator. In the .dyr file I have:

4, 'CBEST', 1, 4.0000, 1.1000, 0.90000, 1.0000, 1.0000, 0.0000, 0.0000, 0.50000E-01, 0.0000, 10.000, -10.000, 0.50000E-02/

4, 'PAUX1T', 4, 1, 7, 0.01, 0.005, -20, 4, -4 /

(I am whatching the frequency of the 7th bus)

But still, when I activate the dyr file in PSS-E, I cannot see the PAUX1T anywhere. I've been reading that many have been using such combination of models, but I don't know how is that possible, since CBEST is a generator model and not a FACTS device (or two-terminal dc line, or multi-terminal dc line, or VSC dc line).

I am looking forward for your help!

Thank you in advance!