Revision history [back]
 | 1 | initial version |
INITIAL CONDITIONS SUSPECT after integrating DFIGs/wind turbine
Hi everyone,
In my study, I am going to carry out simulation in IEEE39 system with integration of three DFIG wind farms, but every time I initialize my case the printer output many INITIAL CONDITIONS SUSPECTs :
INITIAL CONDITIONS SUSPECT:
I DSTATE(I) STATE(I) MODEL STATE BUS# X-- NAME --X BASKV ID
4 -0.26081E-01 0.92885 GENTRA K 31 31 1.0000 1
5 -0.15993E-01 0.0000 GENTRA K+1 31 31 1.0000 1
13 -0.14687 1.2892 GENTRA K 34 34 1.0000 1
14 -0.32437E-01 0.0000 GENTRA K+1 34 34 1.0000 1
25 -0.12928E-01 1.0866 GENTRA K 38 38 1.0000 1
26 -0.10154E-01 0.0000 GENTRA K+1 38 38 1.0000 1
103 -2.1261 0.14033 ESDC1A K+2 30 30 1.0000 1
108 -6.8658 -0.38166 ESDC1A K+2 31 31 1.0000 1
113 -3.8843 0.36194E-01 ESDC1A K+2 32 32 1.0000 1
118 -5.1280 -0.11104 ESDC1A K+2 33 33 1.0000 1
162 -0.16158 -0.86190E-01 WT3E1 K+1 40 40 1.0000 1
168 -1.2927 0.95240 WT3E1 K+7 40 40 1.0000 1
169 -11.634 0.0000 WT3E1 K+8 40 40 1.0000 1
172 -0.23692 -0.63690E-01 WT3E1 K+1 41 41 1.0000 1
178 -1.8954 0.96480 WT3E1 K+7 41 41 1.0000 1
179 -17.058 0.0000 WT3E1 K+8 41 41 1.0000 1
182 -0.57324E-01 -0.75673E-02 WT3E1 K+1 42 42 1.0000 1
188 -0.45859 1.0191 WT3E1 K+7 42 42 1.0000 1
189 -4.1273 0.0000 WT3E1 K+8 42 42 1.0000 1
I have many times of modifying the parameters of excitation, DFIGs and generators, but that not really worked.
Actually, if I just integrate one or two DFIGs, the initial conditions are ok. But I don't know what goes wrong when I integrate the three or more.
My raw and dyr files are attached on https://drive.google.com/file/d/1S8aawbNKoH7fSPdjN6Qu5IMQR2_ad0Ch/view?usp=sharing
Thank you in advance, any help will be appreciated
| | 2 | No.2 Revision |
INITIAL CONDITIONS SUSPECT after integrating DFIGs/wind turbine
Hi everyone,
In my study, I am going to carry out simulation in IEEE39 system with integration of three DFIG wind farms, but every time I initialize my case the printer output many INITIAL CONDITIONS SUSPECTs :
INITIAL CONDITIONS SUSPECT:
I DSTATE(I) STATE(I) MODEL STATE BUS# X-- NAME --X BASKV ID
4 -0.26081E-01 0.92885 GENTRA K 31 31 1.0000 1
5 -0.15993E-01 0.0000 GENTRA K+1 31 31 1.0000 1
13 -0.14687 1.2892 GENTRA K 34 34 1.0000 1
14 -0.32437E-01 0.0000 GENTRA K+1 34 34 1.0000 1
25 -0.12928E-01 1.0866 GENTRA K 38 38 1.0000 1
26 -0.10154E-01 0.0000 GENTRA K+1 38 38 1.0000 1
103 -2.1261 0.14033 ESDC1A K+2 30 30 1.0000 1
108 -6.8658 -0.38166 ESDC1A K+2 31 31 1.0000 1
113 -3.8843 0.36194E-01 ESDC1A K+2 32 32 1.0000 1
118 -5.1280 -0.11104 ESDC1A K+2 33 33 1.0000 1
162 -0.16158 -0.86190E-01 WT3E1 K+1 40 40 1.0000 1
168 -1.2927 0.95240 WT3E1 K+7 40 40 1.0000 1
169 -11.634 0.0000 WT3E1 K+8 40 40 1.0000 1
172 -0.23692 -0.63690E-01 WT3E1 K+1 41 41 1.0000 1
178 -1.8954 0.96480 WT3E1 K+7 41 41 1.0000 1
179 -17.058 0.0000 WT3E1 K+8 41 41 1.0000 1
182 -0.57324E-01 -0.75673E-02 WT3E1 K+1 42 42 1.0000 1
188 -0.45859 1.0191 WT3E1 K+7 42 42 1.0000 1
189 -4.1273 0.0000 WT3E1 K+8 42 42 1.0000 1
I have tried many times of modifying the parameters of excitation, DFIGs and generators, but that not really worked.
Actually, if I just integrate one or two DFIGs, the initial conditions are ok. But I don't know what goes wrong when I integrate the three or more.
My raw and dyr files are attached on https://drive.google.com/file/d/1S8aawbNKoH7fSPdjN6Qu5IMQR2_ad0Ch/view?usp=sharing
Thank you in advance, any help will be appreciated
