Revision history [back]

What is the best way to tune parameters such as the gain (K), time constants (T1 to T4) and the capacitor\reactor size for the SVC models CSVGN1 (generator model) and CSSCST (switched shunt model) in PSS/E? I am getting an error of initial conditions suspect for the first regulator (state K) for the models. When I increase the time constant T3 to 10 the DSTATE error reduces to about 0.004 but there is an overshoot in the voltage and the initial conditions suspect error is still there. Can you give me typical parameters that I can use on a small SVC (rating of about -0.3/0.3, -0.1/0.1 or -1/1)?