Revision history [back]
 | 1 | initial version |
What does 'psspy.save("XX.cnv")' mean in the following code for running dynamic simulation? What is .cnv file?
psspy.bsys(sid = 5, numbus=len(closebybuses), buses = closebybuses) ierr = psspy.deleteallplot_channels() ierr = psspy.chsb(sid=5, all=0, status4=1, status5=1)
psspy.strt2([0,1],str("faulttestseverelocalbus"+str(faultbus)+"coalretired.out")) psspy.save("simstartseverecoalretired.cnv")
| | 2 | No.2 Revision |
What does 'psspy.save("XX.cnv")' mean in the following code for running dynamic simulation? What is .cnv file?
psspy.bsys(sid = 5, numbus=len(closebybuses), buses = closebybuses) ierr = psspy.deleteallplot_channels() ierr = psspy.chsb(sid=5, all=0, status4=1, status5=1)
psspy.strt2([0,1],str("faulttestseverelocalbus"+str(faultbus)+"coalretired.out")) psspy.save("simstartseverecoalretired.cnv")
| | 3 | No.3 Revision |
What does 'psspy.save("XX.cnv")' mean in the following code for running a dynamic simulation? What is .cnv file?
psspy.bsys(sid = 5, numbus=len(closebybuses), buses = closebybuses) ierr = psspy.deleteallplot_channels() ierr = psspy.chsb(sid=5, all=0, status4=1, status5=1)
psspy.strt2([0,1],str("faulttestseverelocalbus"+str(faultbus)+"coalretired.out")) psspy.save("simstartseverecoalretired.cnv")
| | 4 | No.4 Revision |
What does 'psspy.save("XX.cnv")' mean in a the following code for running dynamic simulation? What is .cnv file?
psspy.bsys(sid = 5, numbus=len(closebybuses), buses = closebybuses) ierr = psspy.deleteallplot_channels() ierr = psspy.chsb(sid=5, all=0, status4=1, status5=1)
psspy.strt2([0,1],str("faulttestseverelocalbus"+str(faultbus)+"coalretired.out")) psspy.save("simstartseverecoalretired.cnv")
| | 5 | No.5 Revision |
What does 'psspy.save("XX.cnv")' mean in the following code for running a dynamic simulation? What is .cnv file?
Part of the dynamic simulation code is as follows. The initialization process for the dynamic simulation is skipped: psspy.bsys(sid = 5, numbus=len(closebybuses), buses = closebybuses) ierr = psspy.deleteallplot_channels() ierr = psspy.chsb(sid=5, all=0, status4=1, status5=1)
psspy.strt2([0,1],str("faulttestseverelocalbus"+str(faultbus)+"coalretired.out")) psspy.save("simstartseverecoalretired.cnv")
| | 6 | No.6 Revision |
What does 'psspy.save("XX.cnv")' mean in a the following code for running dynamic simulation? What is .cnv file?
Part of the dynamic simulation code is as follows. The initialization process for the dynamic simulation is skipped: psspy.bsys(sid = 5, numbus=len(closebybuses), buses = closebybuses) ierr = psspy.deleteallplot_channels() ierr = psspy.chsb(sid=5, all=0, status4=1, status5=1)
psspy.strt2([0,1],str("faulttestseverelocalbus"+str(faultbus)+"coalretired.out")) psspy.save("simstartseverecoalretired.cnv")
| | 7 | No.7 Revision |
What does 'psspy.save("XX.cnv")' mean in the following code for running a dynamic simulation? What is a .cnv file?
Part of the dynamic simulation code is as follows. The initialization process for the dynamic simulation is skipped:
skipped:
*
psspy.bsys(sid = 5, numbus=len(closebybuses), numbus=len(close_by_buses), buses = closebybuses)
close_by_buses)
ierr = psspy.deleteallplot_channels()
psspy.delete_all_plot_channels()
ierr = psspy.chsb(sid=5, all=0, status4=1, status5=1)status5=1)
psspy.strt_2([0,1],str("fault_test_severe_local_bus_"+str(fault_bus)+"coal_retired.out"))
psspy.save("**sim_start_severe_coal_retired.cnv**")psspy.strt2([0,1],str("faulttestseverelocalbus"+str(faultbus)+"coalretired.out"))
psspy.save("simstartseverecoalretired.cnv")*
| | 8 | No.8 Revision |
What does 'psspy.save("XX.cnv")' mean in a the following code for running dynamic simulation? What is a .cnv file?
Part of the dynamic simulation code is as follows. The initialization process for the dynamic simulation is skipped:
*
psspy.bsys(sid = 5, numbus=len(close_by_buses), buses = close_by_buses)
ierr = psspy.delete_all_plot_channels()
ierr = psspy.chsb(sid=5, all=0, status4=1, status5=1)
psspy.strt_2([0,1],str("fault_test_severe_local_bus_"+str(fault_bus)+"coal_retired.out"))
psspy.save("**sim_start_severe_coal_retired.cnv**")*
| | 9 | No.9 Revision |
What does 'psspy.save("XX.cnv")' mean in the following code for running a dynamic simulation? What is a .cnv file?
Part of the dynamic simulation code is as follows. The initialization process for the dynamic simulation is skipped:
psspy.bsys(sid = 5, numbus=len(close_by_buses), buses = close_by_buses)
ierr = psspy.delete_all_plot_channels()
ierr = psspy.chsb(sid=5, all=0, status4=1, status5=1)
psspy.strt_2([0,1],str("fault_test_severe_local_bus_"+str(fault_bus)+"coal_retired.out"))
psspy.save("**sim_start_severe_coal_retired.cnv**")
*psspy.save("sim_start_severe_coal_retired.cnv")*| | 10 | No.10 Revision |
What does 'psspy.save("XX.cnv")' mean in a the following code for running dynamic simulation? What is a .cnv file?
Part of the dynamic simulation code is as follows. The initialization process for the dynamic simulation is skipped:
psspy.bsys(sid = 5, numbus=len(close_by_buses), buses = close_by_buses)
ierr = psspy.delete_all_plot_channels()
ierr = psspy.chsb(sid=5, all=0, status4=1, status5=1)
psspy.strt_2([0,1],str("fault_test_severe_local_bus_"+str(fault_bus)+"coal_retired.out"))
*psspy.save("sim_start_severe_coal_retired.cnv")*
psspy.save("sim_start_severe_coal_retired.cnv")