First time here? We are a friendly community of Power Systems Engineers. Check out the FAQ!
1 | initial version |
I am creating New Minimum Model for a large Network ( 30 G generation ). When I disconnect some generation according to the operation , I receive this msg Largest mismatch: 8797.01 MW 3476.87 Mvar 9459.17 MVA at bus 30962 [QTF115 115.00] System total absolute mismatch: 21182.42 MVA
and Power Flow is blown up. I try flat start it worked fine. Should I continue on this model or I need to fix the Mismatch on this bus?
2 | No.2 Revision |
I am creating New Minimum Model for a large Network ( 30 G generation ). When I disconnect some generation according to the operation , I receive this msg Largest mismatch: 8797.01 MW 3476.87 Mvar 9459.17 MVA at bus 30962 [QTF115 115.00] System total absolute mismatch: 21182.42 MVA
and Power Flow is blown up. I changed the ietration to Newthon Raphspn it worked fine I try flat start it worked fine. Should I continue on this model or I need to fix the Mismatch on this bus?