Revision history [back]
 | 1 | initial version |
The WTG4 is quite stable but the WTG3 has to be modified a little bit before running any simulation If you using WT3G2, change the X source to 1 from the power flow model (.raw or .sav) The WTG1 and WTG2 is quite outdated.
| | 2 | No.2 Revision |
The WTG4 is quite stable but the WTG3 has to be modified a little bit before running any simulation
If you using WT3G2, change the X source to 1 from the power flow model (.raw or .sav)
The WTG1 and WTG2 is quite outdated.outdated.
esig.energy/wiki-main-page/wt3-generic-wind-model/
esig.energy/wiki-main-page/wt4-generic-wind-model/
| | 3 | No.3 Revision |
The WTG4 is quite stable but the WTG3 has to be modified a little bit before running any simulation
If you using WT3G2, change the X source to 1 from the power flow model (.raw or .sav)
The WTG1 and WTG2 is quite outdated.
esig.energy/wiki-main-page/wt3-generic-wind-model/
esig.energy/wiki-main-page/wt4-generic-wind-model/www.esig.energy/wiki-main-page/wt4-generic-wind-model/
| | 4 | No.4 Revision |
The WTG4 is quite stable but the WTG3 has to be modified a little bit before running any simulation
If you using WT3G2, change the X source to 1 from the power flow model (.raw or .sav)
The WTG1 and WTG2 is quite outdated.
esig.energy/wiki-main-page/wt3-generic-wind-model/
outdated.
www.esig.energy/wiki-main-page/wt3-generic-wind-model/
www.esig.energy/wiki-main-page/wt4-generic-wind-model/
| | 5 | No.5 Revision |
The WTG4 is quite stable but the WTG3 has to be modified a little bit before running any simulation If you using WT3G2, change the X source to 1 from the power flow model (.raw or .sav) The WTG1 and WTG2 is quite outdated.
Sample model WT3
www.esig.energy/wiki-main-page/wt3-generic-wind-model/
Sample model WT4
www.esig.energy/wiki-main-page/wt4-generic-wind-model/
