Revision history [back]
 | 1 | initial version |
The code works just fine, in or out of the (v34.3.1) PSSe GUI. I set buses to 15000. I do not use Spyder, but a simple DOS window. I got the following output to the command eeqv:
"5 radial and two-point buses equivalenced
Matrix is too big at row 8--increasing MATRIX GROWTH FACTOR option setting to 2.25
Matrix is too big at row 12--increasing MATRIX GROWTH FACTOR option setting to 2.5
Matrix is too big at row 12--increasing MATRIX GROWTH FACTOR option setting to 2.75
Diagonals = 18 Off-diagonals = 63 Maximum size = 78
PSS(R)E PROGRAM APPLICATION GUIDE EXAMPLE
BASE CASE INCLUDING SEQUENCE DATA
Bus 205 regulated by generation at bus 206 [URBGEN 18.000] has been deleted
Bus 201 regulated by generation at bus 211 [HYDRO_G 20.000] has been deleted
Bus 3008 regulated by generation at bus 3018 [CATDOG_G 13.800] has been deleted
"
