Revision history [back]

That's a great question. unfortunately, there is no step by step guide out there. Why not we create one here. Lets start with a draft and then others can reivew and update it:

Load Sav file Power flow 1. Convernt Generator 2. Order network for matrix 3. Factorise admitance 4. Solution for switching studie Load Dynamic file subsystem Channel selection • Voltage • Freq • Pelec • Qelec • Angle Dynamic simulation option • network frequncy dependance • set relative machine angle Save snapshot Snp Open the Snp Perform dynamic simulation • output file • initialize Add event study in Dynamic Tree, specify time • Add event item • select event type • select bus • fault admitance X -2e10 Right Click on event study Run Dynamic

That's a great question. unfortunately, there is no step by step guide out there. Why not we create one here.

Lets start with a draft and then others can reivew review and update it:

Load Sav file
Power flow
1.  Convernt Convert Generator
2.  Order network for matrix
3.  Factorise admitance
Factorize admittance
4.  Solution for switching studie
studies
Load Dynamic file
subsystem Channel selection
•   Voltage
•   Freq
•   Pelec
•   Qelec
•   Angle
Dynamic simulation option
•   network frequncy dependance
frequency dependence
•   set relative machine angle
Save snapshot Snp
Open the Snp
Perform dynamic simulation
•   output file
•   initialize
Add event study in Dynamic Tree, specify time
•   Add event item
•   select event type 
•   select bus
•   fault admitance X -2e10
Right Click on event study
Run Dynamic
Dynamic