Revision history [back]

Hi melia4. Can you provide any additional information on the wind turbine you need to model? Information such as the type, size, manufacturer, and type of simulations the model needs to be used for would be helpful.

Siemens PTI works with some wind farm manufacturers on model development. You can request manufacturer specific models from Siemens PTI website link below. https://w3.usa.siemens.com/smartgrid/us/en/transmission-grid/products/grid-analysis-tools/transmission-system-planning/pages/wind-farm-model-download.aspx

IF you are looking for a more generic model you can find some generic model data for wind turbines in Chapter 22 of the PSSE 33.9 Program Application Guide Volume II that should come with your PSSE install.

Additionally, depending on what jurisdiction you are in some groups such as the WECC have some guidelines available for modelling wind turbines available that can be helpful. http://renew-ne.org/wp-content/uploads/2012/05/WECCWindPlantPowerFlowModelingGuide.pdf https://www.wecc.biz/Reliability/WECC%20Wind%20Plant%20Dynamic%20Modeling%20Guidelines.pdf

The IEEE also has some technical paper compendium PES-TPC3 that can also provide some insight into modelling wind turbines and their collector systems. If you are a PES member I think it is free to download. http://resourcecenter.ieee-pes.org/pes/product/technical-publications/PESTPC3