Revision history [back]

I am normally not using Plotbook for plotting of out-files, but the following works for me:

Example, plotting Pmech and Pelec in MW for generator at bus 206 in savnw network. Mbase is 725 MVA.

Define two functions:

1: Multiply Pmech with Mbase: A*725

2: Multiply Pelec with Sbase: A*100

First function:

Second function:

The two defined functions in Plot Tree:

Drag and drop the two functions in the Plot Page and adjust the scales:

A is channel 33 in first function and channel 8 in second function.